IYRO NT Series
N-Type TOPCon Solar Modules
560 – 600 Wp
Framed dual glass · bifacial
144 half-cut · MBB
Framed dual-glass bifacial modules on N-type TOPCon cells — 144 half-cut cells, multi-busbar, rated for 5400 Pa snow and 2400 Pa wind.
- Up to 23.26% module efficiency
- Bifaciality factor 80 ± 5%
- Rated backside gain to +25% power output
- 5400 Pa snow load, 2400 Pa wind load
- 10-year product · 25-year linear performance warranty
Available Models
9 ratings in one series
Same construction and warranty across the range. Pick a rating to see its full specification.
Selected — IYRO NT Series 580 W
- Peak power (Pmax)
- 580 Wp
- Module efficiency
- 22.48 %
- Open-circuit voltage
- 51.30 V
- Short-circuit current
- 14.28 A
- Voltage at Pmax
- 43.13 V
- Current at Pmax
- 13.45 A
- Cell count
- 144 (91 × 182 mm)
- Dimensions
- 2278 × 1134 × 35 mm
- Weight
- 32.3 kg
The Short Version
A thin oxide layer, and less of your power lost as heat.
TOPCon puts an ultra-thin tunnel oxide between the silicon and the contact. Carriers still pass; recombination at the contact largely does not. More output from the same roof area, and noticeably less loss on a 45 °C afternoon than a PERC module of the same rating.
Higher module efficiency
Up to 23.26% at STC, so a fixed roof carries more kW and balance-of-system cost per watt falls.
Bifacial, 80 ± 5% bifaciality
Rear-side generation on top of the front-side rating — the brochure rates gain scenarios to +25%.
Best-in-class thermal coefficients
Less power lost per degree above 25 °C — visible every summer afternoon.
Better weak-light performance
Useful output earlier and later in the day, and through overcast conditions.
Enhanced crack tolerance
Half-cut multi-busbar layout, rated for 5400 Pa snow and 2400 Pa wind load.
Excellent PID resistance
PID-free, UV-resistant encapsulation for humid and coastal sites.
Applications
Where this range is specified
Residential rooftop
560–575 W for 3–10 kW domestic arrays.
Commercial rooftop
580–600 W balances string length against roof access.
Ground mount
Bifacial rear gain gets its best return over reflective ground cover.
Utility scale
Dual-glass construction for long-duration outdoor exposure.
Compare
The full series, side by side
Selected model highlighted.
| Model | 560 W | 565 W | 570 W | 575 W | 580 W | 585 W | 590 W | 595 W | 600 W |
|---|---|---|---|---|---|---|---|---|---|
| Peak power (Pmax) (Wp) | 560 | 565 | 570 | 575 | 580 | 585 | 590 | 595 | 600 |
| Module efficiency (%) | 21.71 | 21.90 | 22.09 | 22.29 | 22.48 | 22.67 | 22.87 | 23.06 | 23.26 |
| Open-circuit voltage (V) | 50.50 | 50.70 | 50.90 | 51.10 | 51.30 | 51.50 | 51.70 | 51.90 | 52.10 |
| Short-circuit current (A) | 13.93 | 14.02 | 14.10 | 14.20 | 14.28 | 14.36 | 14.45 | 14.53 | 14.61 |
| Voltage at Pmax (V) | 42.44 | 42.61 | 42.77 | 42.94 | 43.13 | 43.27 | 43.45 | 43.62 | 43.83 |
| Current at Pmax (A) | 13.20 | 13.26 | 13.33 | 13.40 | 13.45 | 13.52 | 13.58 | 13.65 | 13.69 |
| Cell count | 144 (91 × 182 mm) | 144 (91 × 182 mm) | 144 (91 × 182 mm) | 144 (91 × 182 mm) | 144 (91 × 182 mm) | 144 (91 × 182 mm) | 144 (91 × 182 mm) | 144 (91 × 182 mm) | 144 (91 × 182 mm) |
| Dimensions (mm) | 2278 × 1134 × 35 | 2278 × 1134 × 35 | 2278 × 1134 × 35 | 2278 × 1134 × 35 | 2278 × 1134 × 35 | 2278 × 1134 × 35 | 2278 × 1134 × 35 | 2278 × 1134 × 35 | 2278 × 1134 × 35 |
| Weight (kg) | 32.3 | 32.3 | 32.3 | 32.3 | 32.3 | 32.3 | 32.3 | 32.3 | 32.3 |
Common To Every Model
| Cell technology | TOPCon N-type mono bifacial, half-cut, multi-busbar |
| Cell size | 91 × 182 mm |
| Cell arrangement | 144 cells (12 × 6 || 12 × 6) |
| Bifaciality factor | 80 ± 5% |
| Backside power gain | Rated at 10%, 15%, 20% and 25% — dependent on plant design and location |
| Front / back glass | 2 mm low-iron semi-tempered glass |
| Encapsulant | PID free and UV resistant |
| Back sheet | Dual glass (framed) |
| Frame | Anodised aluminium alloy |
| Junction box | IP68, weatherproof PPO |
| Cable and connector | IP68 rated, MC4 compatible |
| Cable cross-section and length | 4 mm² × 500 mm |
| Mechanical load | 5400 Pa snow, 2400 Pa wind |
| NOCT | 43 ± 2 °C |
| Operating temperature | −40 °C to +85 °C |
| Temperature coefficient of Isc (α) | 0.046 %/°C |
| Temperature coefficient — second row, unlabelled in datasheet | −0.26 %/°C |
| Temperature coefficient — third row, unlabelled in datasheet | −0.30 %/°C |
| Product warranty | 10 years |
| Performance warranty | 25 years linear |
| Certification | IS 14286:2010 / IEC 61215:2005, IS/IEC 61730 (Part 1 & 2):2004, IEC TS 62804-1:2015, IEC 61701:2020 |
Documentation
Everything a tender pack needs
No form, no registration. Datasheets are per model.
Product Documents
Test Certificates
What actually changes with TOPCon versus Mono PERC?
A tunnel-oxide layer cuts recombination at the rear contact. Higher efficiency ceiling and better temperature coefficients. On a fixed roof that means more kW installed; over 25 years, more kWh from the same kW.
Which rating should I specify for a rooftop?
The series runs 560 W to 600 W in 5 W steps on one physical size — 2278 × 1134 × 35 mm at 32.3 kg. Specify by string voltage and roof area rather than by rating alone; the module handling weight does not change across the range.
Are these modules bifacial?
The whole series is — framed dual glass, bifaciality factor 80 ± 5%. The datasheet rates backside gain at 10%, 15%, 20% and 25% scenarios, but states plainly that actual gain depends on plant design and location, so we quote it per site rather than as a headline number.
What is the warranty?
10 years product and 25 years linear performance, against IS 14286:2010 / IEC 61215:2005, IS/IEC 61730 Parts 1 and 2, IEC TS 62804-1:2015 and IEC 61701:2020.
Request Pricing
Tell us the rating and the volume.
Pricing, current lead time and the datasheet come back within one working day. Dealer, project and tender quantities all welcome.
Also In Range
